Your shopping cart is empty!
2528059 Encoder Case for PM2805
This is the optional encoder case designed for PM2805.
Drawings
Usually, the PM2805 encoder is not installed on the motor, it is installed on the motor fixture. So the motor PM2805 with or without encoder size is same. If you need to install the encoder on the motor, you are suggested to buy the optional encoder case for PM2805.
The following drawing is for PM280 with optional encoder case.
The Encoder case is designed for PM2805 motor.
Please note that the encoder and PM2805 motor are not included.
PM2805 specifications.
Item | PM2805 |
Weight w/o encoder house g | 33 |
Motor Dia x L mm | 33.5 x 15.3 |
Stator mm | 28 x 5 |
Stator slots & Magnet Poles | 24N 28P |
Input Voltage V | 8-12 |
Torque | 30mN•m @11.1V |
Gimbal weight with Camera | 150-350g 5.3-12oz |
Encoder | AS5600 PWM |
Encoder Connector Standard Encoder Connector Optional |
PWM SPI |
Slip ring Dia mm | 6.5 |
Unit | PM2205 | PM2805 | PM3505 | PM3510 | PM4310 | PM4315 | PM5215 | PM5225 | PM6010 | PM6025 | PM100 | |
Nom. Voltage | V | 12 | 12 | 12 | 12 | 16 | 16 | 24 | 24 | 24 | 36 | 24 |
Nom. Current | A | 0.66 | 0.81 | 0.79 | 0.53 | 0.79 | 0.59 | 1.12 | 1.28 | 1.19 | 1.09 | 1.75 |
Nom. Torque | N.m | 0.04 | 0.06 | 0.07 | 0.11 | 0.21 | 0.28 | 0.76 | 1.26 | 0.73 | 1.77 | 1.60 |
Nom. Speed | rpm | 792 | 950 | 587 | 336 | 343 | 238 | 221 | 221 | 182 | 166 | 130 |
Max Speed | rpm | 1200 | 1452 | 890 | 550 | 520 | 360 | 336 | 336 | 275 | 252 | 290 |
Stall Torque | N.m | 0.06 | 0.09 | 0.11 | 0.16 | 0.32 | 0.42 | 1.15 | 1.90 | 1.10 | 2.68 | 2.00 |
Stall Current | A | 1.00 | 1.22 | 1.20 | 0.80 | 1.20 | 0.90 | 1.69 | 1.94 | 1.80 | 1.65 | 3.00 |
Resistance | Ω | 7.10 | 5.00 | 5.30 | 7.80 | 10.9 | 15.2 | 11.8 | 11.8 | 11.9 | 20.5 | 3.00 |
Inductance | Mh | 1.45 | 1.51 | 2.35 | 3.95 | 4.74 | 6.56 | 7.80 | 11.31 | 13.03 | 25.80 | 31.50 |
Speed const. | rpm/v | 100 | 121 | 74 | 45 | 33 | 23 | 14 | 14 | 11 | 7 | 11 |
Torque const. | N.m/A | 0.06 | 0.07 | 0.09 | 0.20 | 0.27 | 0.47 | 0.68 | 0.98 | 0.61 | 1.62 | 1.13 |
Rotor inertia | gcm^2 | 42 | 51 | 56 | 81 | 202 | 268 | 667 | 933 | 748 | 1645 | 2860 |
Pole pairs | 7 | 7 | 11 | 11 | 14 | 14 | 11 | 11 | 14 | 14 | 21 | |
Motor weight | g | 20 | 45 | 42 | 73 | 113 | 158 | 246 | 330 | 247 | 511 | 520 |
Working temp | ℃ | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 | -20/80 |
Max demagnet | ℃ | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 |
Encoder type | AS5048A/AS5600 |