MG8010-36 Robot dog motor with gear box 36:1 & RS485 driver Stator 8010 KV51

MG8010-36 Robot dog motor with gear box 36:1 & RS485 driver Stator 8010 KV51
Product Code: 25380106
Availability: 50000
Price: $498.80
Ex Tax: $498.80
Qty:     - OR -   Add to Wish List
Add to Compare

25380106 MG8010-36 Robot dog Motor with ​Gear box 36:1 & RS485 Driver, Stator 8010 KV51

Specifications:

Motor Part No.   MG4005 MG6010 MG6012 Duo MG8010 MG8010-36 MG8016 MG8016 Duo MG10015
Turns   25 20 20 18  17 13 13 11
Nominal voltage V 24 48 48 48  48 48 48 48
Nominal current A 1.6 3.8 3.8 4.9  6.9 6.5 6.5 8
Nominal power   38.4 182.4 182.4 240  800 330 330 385
Nominal torque N.M 1 5 5 9  35 13 13 30
Nominal Speed rpm 253 285 285 165  68 155 155 150
Max Speed rpm 316 350 350 250  90 225 225 190
Stall torque N.M 2.5 11.5 11.5 21  45 35 35 50
Stall current A 4 8 8 7  12.6 12.5 12.5 13
Resistance 1.4 0.98 0.98 0.94  0.27 0.55 0.55 0.38
Wire connect   Y Y Y Y  delt Y Y Y
Phase to phase inductance mH 0.5 0.55 0.55 0.73  0.23 0.54 0.54 0.45
Speed constant rpm/v 105 58 58 32  51 30 30 28
Torque constant N.M/A 0.06 1.32 1.32 3.00  0.15 3.30 3.30 3.85
Radial load N 1000 1000 1000 1200  2500 1200 1200 2000
Axial load N 250 250 250 300  500 300 300 500
Rotor inertia gc㎡ 140 850 850 805  2670 3400 3400 5675
Number of pole pairs   13 14 14 20  20 20 20 21
Motor weight g 154 480 480 630  860 710 710 1190
Working temperature C  -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C
Max demagnetize temperature C 120C 120C 120C 120C  120C 120C 120C 120C
Gear Gear ratio    10:1  8:1  8:1  6:1  36:1  6:1  6:1  7:1
Backlash   10 5 5 5  8 5 5 5
Driver Driver No.   DF40 DRC15 DRC15 DRC20 DG80v2 DRC20 DRC20 DRC20
Input voltage V  7.4-32  12-48  12-48 12-50  12-60 12-50 12-50 12-50
Nominal Current A 8 10 10 15   15 15 15
Burst Current A 15 20 20 30   30 30 30
Nominal power W 120 300 300 700   700 700 700
Communication   CAN Bus/RS485 CAN Bus CAN Bus CAN Bus CAN RS485 CAN Bus CAN Bus CAN Bus
Encoder   14-bit 16-bit 16-bit 16-bit  18-bit 16-bit 18-bit 18-bit
2 Encoders   No No Yes No  No No Yes No
Baut rate   1M 1M 1M 1M  1M 1M 1M 1M
Communication frequency   2K 2K 2K 2K  2K 2K 2K 2K
Control frequency                  
     Torque loop kHz 24 24 24 32  32 32 32 24
     Speed loop kHz 8 8 8 8  8 8 8 8
     Position loop kHz 4 4 4 4  4 4 4 4
Control mode                  
     Torque loop   Yes Yes Yes Yes  Yes Yes Yes Yes
     Speed loop   Yes Yes Yes Yes  Yes Yes Yes Yes
     Position loop   Yes Yes Yes Yes  Yes Yes Yes Yes
S-Curve   Yes Yes Yes Yes  Yes Yes Yes Yes
ID Switch   Yes Yes Yes Yes  Yes Yes Yes Yes
Connector   XT2.0 XT2.0 XT2.0 XT2.0  XT2.0 XT2.0 XT2.0 XT2.0
Temperature sensor   Yes Yes Yes Yes  Yes Yes Yes Yes

You are welcome to customize the motor, such as: color, reduction ratio, installation hole position, and other specifications!

Drawing:

Related product list for easy finding the suitable one:

  MIT open source software Commercial software
MIT60 MIT80 MIT80 Pro MG6010 MG6012 Duo MG8010 MG8016 MG8016 Duo MG10015
Motor Power supply V 24 24 / 48 48 48 48 48 48 48 48
Current A 7.4 7 6.5 3.8 3.8 4.9 6.5 6.5 8
Torque N.M 3 9 13 5 5 9 13 13 30
Torque const. N.M/A 1.3 2.4 3.1 1.32 1.32 3.00 3.30 3.30 3.85
Rated speed rpm 300 160 300 285 285 165 155 155 150
Max speed rpm 400 245 380 350 350 250 225 225 190
Speed const. rpm/v 140 100 100 58 62 32 30 30 28
Resistance 0.26 0.17 0.161 0.98 0.98 0.94 0.55 0.55 0.38
Inductance mH 0.112 0.057 0.073 0.55 0.55 0.73 0.54 0.54 0.45
Poles   14 21 21 14 14 20 20 20 21
Motor power W 210 200 480 182.4 182.4 240 330 330 385
Size mm 76x63.5 96x39.5 96x41.7 79x44.7 80x44.5 98x43 99x49.5 99x49.5 120x50.2
Max motor temperature C 85C 85C 85C  -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C
Gearbox Gear rate    6:1  6:1  6:1  8:1  8:1  6:1  6:1  6:1  7:1
Stall torque N.M 9 15 35 11.5 11.5 21 35 35 50
Driver Encoder   12bit MA702 15bit 12bit 16-bit 16-bit 16-bit 16-bit 18-bit 18-bit
Encoders pcs 1 1 1 1 2 1 1 2 1
Position control mode kHz 2 2 2 4 4 4 4 4 4
Protection   stall warning Over current/over heat
Communication   SmartCAN 1MHz CAN Bus/RS485
Firmware   MIT open source software Commercial software/ Torque loop/Position loop/Speed loop
Assembly Ambient temperature C 0-40C 0-40C 0-40C -20-40C -20-40C -20-40C -20-40C -20-40C -20-40C
Weight g 315g 600g 714g 480 480 630 710 710 1190
 
 

Applications:

Open RS485 Protocol

  1. RS485 bus parameter

Bus type:

RS485

Bus interface chip:

MAX3485

Bus interface level:

TTL 3.3V

Baud rate:

9600, 19200, 57600, 115200 (default)

Data bits:

8

Parity:

none

Stop position:

1

 

2 Some RS485 command samples

The following is a sample to send an open running command to the #1 motor running at 250 power in HEX. 
3E A0 01 02 E1 FA 00 FA
The following is a sample to send a Speed closed loop control command to the #1 motor running at an angular speed 720dps in HEX
3E A2 01 04 E5 40 19 01 00 5A
The following is a sample to send a Position + Speed closed loop control command to #1 motor to run at speed 180dps to 360 degree
3E A4 01 0C EF A0 8C 00 00 00 00 00 00 50 46 00 00 C2

Motor Part No.   MG4005 MG6010 MG6012 Duo MG8010 MG8010-36 MG8016 MG8016 Duo MG10015
Turns   25 20 20 18  17 13 13 11
Nominal voltage V 24 48 48 48  48 48 48 48
Nominal current A 1.6 3.8 3.8 4.9  6.9 6.5 6.5 8
Nominal power   38.4 182.4 182.4 240  800 330 330 385
Nominal torque N.M 1 5 5 9  35 13 13 30
Nominal Speed rpm 253 285 285 165  68 155 155 150
Max Speed rpm 316 350 350 250  90 225 225 190
Stall torque N.M 2.5 11.5 11.5 21  45 35 35 50
Stall current A 4 8 8 7  12.6 12.5 12.5 13
Resistance 1.4 0.98 0.98 0.94  0.27 0.55 0.55 0.38
Wire connect   Y Y Y Y  delt Y Y Y
Phase to phase inductance mH 0.5 0.55 0.55 0.73  0.23 0.54 0.54 0.45
Speed constant rpm/v 105 58 58 32  51 30 30 28
Torque constant N.M/A 0.06 1.32 1.32 3.00  0.15 3.30 3.30 3.85
Radial load N 1000 1000 1000 1200  2500 1200 1200 2000
Axial load N 250 250 250 300  500 300 300 500
Rotor inertia gc㎡ 140 850 850 805  2670 3400 3400 5675
Number of pole pairs   13 14 14 20  20 20 20 21
Motor weight g 154 480 480 630  860 710 710 1190
Working temperature C  -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C -20 - 80C  -20 - 80C  -20 - 80C  -20 - 80C
Max demagnetize temperature C 120C 120C 120C 120C  120C 120C 120C 120C
Gear Gear ratio    10:1  8:1  8:1  6:1  36:1  6:1  6:1  7:1
Backlash   10 5 5 5  8 5 5 5
Driver Driver No.   DF40 DRC15 DRC15 DRC20 DG80v2 DRC20 DRC20 DRC20
Input voltage V  7.4-32  12-48  12-48 12-50  12-60 12-50 12-50 12-50
Nominal Current A 8 10 10 15   15 15 15
Burst Current A 15 20 20 30   30 30 30
Nominal power W 120 300 300 700   700 700 700
Communication   CAN Bus/RS485 CAN Bus CAN Bus CAN Bus CAN RS485 CAN Bus CAN Bus CAN Bus
Encoder   14-bit 16-bit 16-bit 16-bit  18-bit 16-bit 18-bit 18-bit
2 Encoders   No No Yes No  No No Yes No
Baut rate   1M 1M 1M 1M  1M 1M 1M 1M
Communication frequency   2K 2K 2K 2K  2K 2K 2K 2K
Control frequency                  
     Torque loop kHz 24 24 24 32  32 32 32 24
     Speed loop kHz 8 8 8 8  8 8 8 8
     Position loop kHz 4 4 4 4  4 4 4 4
Control mode                  
     Torque loop   Yes Yes Yes Yes  Yes Yes Yes Yes
     Speed loop   Yes Yes Yes Yes  Yes Yes Yes Yes
     Position loop   Yes Yes Yes Yes  Yes Yes Yes Yes
S-Curve   Yes Yes Yes Yes  Yes Yes Yes Yes
ID Switch   Yes Yes Yes Yes  Yes Yes Yes Yes
Connector   XT2.0 XT2.0 XT2.0 XT2.0  XT2.0 XT2.0 XT2.0 XT2.0
Temperature sensor   Yes Yes Yes Yes  Yes Yes Yes Yes

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2003-2017 by SMC Powers Ltd. All Rights Reserved. Email: shop@smc-powers.com Skype:smc-power