400064 FD-100 Discharger 6A 80W
One key smart discharging, born for RC users
Support 2-8s 6-35v with maximum 80W discharging capacity
-
Smart fix current control chip
- Discharging current varies from 0.5 to 6A,
automaticly cut off after finishing discharging for better protection of your battery.
Easy to use but not simple
- Default cut-off voltage and working temperature could be adjusted through sc-linker by PC or by ISDT smart charger
XT60 Port
- Use one of the most commonly used connector – XT60 as discharging port, no need to make adapter for most of RC users.
Industrial level high speed ball bearing fan with temperature control
- Discharge process will produce a lot of heat, our fan will be the most reliable friend to get the heat out.
Efficient heat dissipation
- Pure aluminum passive cooling module, aluminum alloy shell + high speed ball bearing fan,
Pure aluminum passive cooling module and heat source fit closely, to improve the thermal efficiency greatly,
Aluminum alloy shell is fine, safe, durable, which enhance the overall cooling efficiency
Specifications
- 1.Cells setting 2.Current setting 3.Indicator light
4.Battery input port 5.PC port 6.Beeper
Dimension |
57mm x 120mm x 43mm |
Weight |
295g |
Max Discharger |
80W |
Minimum input voltage |
6V |
Maximum input voltage |
35V |
Battery cells |
2-8S |
Auto cut off protection |
Support |
Abnormal voltage alarm |
Support |
Wrong cell setting alarm |
Support |
Beeper sound |
80dB |
Operation Guide
1.Plug in battery, select cells button
2.Make sure selected number of cells is correct ( For wrong number of cell selection, red light will blink, beeper alarm for 60 second, then auto power off )
3.After 5 second, FD100 would start working, green light will blink.
4.When battery voltage reaches cut off voltage, green light will be always on, beeper alarm for 60s, then auto power off. ( Default discharging voltage is 3.80v /cell, voltage could be modi- fied through PC software, ISDT Q6 pro, T8 smart charger. Adjustable range 3.3v-4.0v/cell )
|