Driver BGC-CAN-DRV SimpleBGC 32-bit CAN Driver V1.2.1

25832033 Driver BGC-CAN-DRV SimpleBGC 32-bit CAN Driver V1.2.1

***************************************************

The following info are for BGC-CAN-DRV V1.0

Description and Specifications
Input voltage: 3s–6s (12–26V)
Current: 10A continuous, 15A impulse with heatsink installed.

Support a big number of models of absolute rotary encoders with the following interfaces:

• SPI
• PWM
• I2C
• A,B,Z
• SSI, BiSS

Main controller connection:

• 2x CAN, optional on-board terminator

Other interfaces:

• Limit switch, Z-Index switch, Emergency switch and several digital I/O pins
• 1-wire for thermal sensor connection
• Address selection pins

Protections:

• Over-current
• Under-voltage
• Short-circuit

The kit includes:

• CAN_Driver controller
• CAN Wire 50 cm
• Header Pin Strip RST2x14

Motor driver with the CAN-bus interface is intended to be used with the CAN-enabled SimpleBGC32 controller.

This module was designed for use with Extended or Pro boards, replacing onboard drivers.

It allows you to build a 3-axis stabilizer based on a modular scheme (see connection diagram) or an extend regular stabilizer by the 4th, 5th axis, with the optimized wiring between modules that is perfectly immune to EMI noise.

Size: 60.5x31.5mm

Pins Specifications: